High performance polymers for multiple releases
Solvent-free and water-based
Protective of the mould surface
Your mould release agent doesn’t have to be abrasive. Use Ababol N, a water-based lubricant that protects mould surfaces for effective and safe results.
Recommended for use as a rubber seal lubricant in the rubber industry and with elastomers.
Improve the efficiency of your moulding process today
Available in 5 litre or 25 litre quantities (subject to stock)
Wet some clean paper with the Ababol N and apply uniformly on the surface of the mould.
Wipe off the surface after applying, this helps a uniform distribution of the material. The wipe off surface must not be done immediately, except when the surface is hot.
Generally it takes around 15 minutes for the N product to cure at 20-25°C, after this you can begin a new coat or start production.
When applying Ababol N with a spray gun, we recommend that the nozzle should be 0.5mm or lower with air assistance. It’s important that the volume of material released can be controlled.
It is recommended that you keep the gun 20-30cm away from the mould surface. You should also keep the movement of the gun uniform across the mould and not simply move the wrist.
Ababol N is recommended for use in the automotive sector and with rubber hoses, gaskets, suspensions, conveyor belts and more.
Visit www.ababoldemould.com for a full instruction application manual on applying Ababol N manually or with a spray gun.
Depending on the quantity ordered, the delivery cost and time may vary.
Please get in touch using one of the contact forms or email us at rasd@aquasealrubber.co.uk to find out more.
Sold and distributed by Aquaseal RubberThe UK’s only distributor of Ababol products
Aquaseal Rubber Ltd are rubber manufacturers based in the North East of England. They are the a trusted distributor of Ababol. After using the product themselves and realising its many benefits, the company decided to become the sole suppliers of the product in the UK.